PS5 not Showing on Samsung TV (Fix No Signal Issue) in 2024

The following article will show you how to fix PS5 not Showing on Samsung TV Issue.

Imagine this: You’ve just got a brand-new PlayStation 5 for Christmas and a copy of Marvel’s Spider-Man 2 or Call of Duty: Modern Warfare III to go alongside it. You excitedly unbox the game console, hook it to your Samsung telly using the HDMI cable, and power it up for the first time—only to find yourself waiting an eternity for the PlayStation logo to appear.

At this point, you’re certain something is wrong; nothing shows up on your TV screen even though the console’s power LED indicator appears to suggest otherwise. It may be that your PS5 was working perfectly fine the other day, but your TV no longer receives a video signal from the console.

So, what’s going on here exactly? Why is My PS5 Showing No Signal on Samsung TV? You might wonder if your PlayStation 5 unit has developed some internal hardware issues. But in most cases, a handful of easy and straightforward troubleshooting steps have proven effective in resolving the error. We’ve outlined some below to help you fix the PS5 not Showing on Samsung TV.

PS5 not Showing on Samsung TV – How to Fix?

PS5 not Showing on Samsung TV

Start with the Basics

Before you jump into the troubleshooting part, let’s go over the setup steps to ensure you’ve connected your PlayStation 5 to your Samsung TV properly.

  • Plug one end of the HDMI cable into the HDMI OUT port on your PS5’s rear I/O panel.
  • The other end of the HDMI cord goes into any HDMI IN ports available on your Samsung TV.
    • If you have a newer Samsung TV with a 4K@120Hz output mode, connect the HDMI cable to the port labelled HDMI IN 4 with a controller But it may vary depending on the model.
  • Plug the power cord into the PS5’s AC IN The other end of it should go into an electrical outlet nearby. After that, press the Power button at the front.
  • With both your PS5 and Samsung TV powered on, press the HOME key on your TV remote, then choose Game Console in the Source
    • For those with an older Samsung TV, press the SOURCE remote button and choose the HDMI source corresponding to the input your PS5 connects to your TV.

That’s the minimum you need to do to get a video signal output from your PS5 to your Samsung TV. Your TV should auto-activate the Input Signal Plus (HDMI UHD Colour on older models) settings to provide the best gaming experience, but if it doesn’t, use these steps:

  • Navigate to your Samsung TV’s Settings
  • Scroll to the General tab, then head to External Device Manager.
  • Select Input Signal Plus (or HDMI UHD Colour) and choose the HDMI port your PS5 is connected to.

If you’ve performed all the steps correctly and you still get no output from your game console, it’s troubleshooting time.

Check Physical Connections

The first thing you should do is ensure both ends of the HDMI cable are securely connected to both the PS5 and the TV. We strongly suggest using the original HDMI 2.1 cord bundled with your Sony console.

Check Cable's Physical Connections

Also, confirm the TV input source matches the HDMI port the PlayStation 5 is connected to. Use your Samsung Universal or Smart Remote to change the input source.

Test Alternate HDMI Ports/Cables

Test Alternate HDMI Ports/Cables

If the physical connections are fine, try using the other HDMI ports on your Samsung TV to see if that solves the issue. Assuming you own a UHD model, only specific ports of your TV may offer the full 4K HDR output. Refer to your TV manual for more details.

Disconnect every other device (e.g., soundbar, Blu-ray player, streaming box) from your Samsung TV to minimise the chances of interference. If your console displays an image, start plugging in your other entertainment devices, one at a time. It’ll help you identify what caused the “No Signal” issue in the first place.

Plug in a different device to the same HDMI port you connected your PS5 to and check whether the device provides an output with no issues. In that case, the problem likely stems from the console itself, probably from its HDMI connection.

It’s also possible the HDMI cable that connects your PS5 to your Samsung TV is damaged or defective. Provided you can’t pinpoint any visible damage, swap it for a new cable and see if that makes a difference.

Ensure the replacement is HDMI 2.1-certified and supports the full 48 Gbps throughput, necessary for PS5 features like 4K output at 120 Hz, HDR, VRR (Variable Refresh Rate), and ALLM (Auto Low Latency Mode).

Power Cycle Your Console & TV

Folks underestimate how effective a simple power cycle has proven to fix a bevvy of issues with nearly every electronic device. If alternating between different HDMI ports of your TV or swapping the video cord didn’t work, cold boot your PS5 and Samsung TV.

  • Press the POWER button on the remote to turn off your TV. Then unplug its power cord from the outlet and leave it for a minute to discharge. After that, plug the cord back in and power your TV on again.
  • Press and hold the PS5’s Power key until the white LED light stops flashing, then unplug the power cable. Wait at least five minutes for the console to drain the residual power, after which you reconnect the cable and power on your PS5.

It’s also a good time to check if your PS5 is powering on correctly. It may be that the console isn’t receiving enough juice from either the AC adapter or the wall outlet to stay on.

  • Unplug the power cord from the PS5 and wait a minute before reconnecting it to the console. Inspect the cord for any signs of damage in the meantime.
  • If the cord appears damaged or you aren’t sure, try using another IEC C7 power cable. You likely have one lying around if you owned a previous-gen PlayStation console, i.e., the PS4 and PS3.
  • Use a different wall outlet to rule out problems with the outlet itself.

If your Samsung TV still doesn’t receive any video signal from your PlayStation even though the console LED light appears to glow solid white, it may be a defective AC adapter, dead power supply unit, or some other internal hardware failure within the console itself. In that case, immediately reach out to PlayStation Support for a replacement or repair.

Change PS5 Video Output in Safe Mode

PS5 no video output on Samsung TV? Your Samsung TV might conflict with the PS5’s video settings, especially if you had a different display plugged in during the initial console setup. While the console should auto-adjust to your TV just fine, in rare cases, you must change the video output via Safe Mode for proper compatibility.

  • Long press the Power button and wait to hear two beeps. Release the button after the second beep.
    • If your PS5 is on, power it off by holding the Power button for three seconds. The power LED should blink a few times before turning off.
  • Connect your DualSense controller using the USB cable and press the PS
  • If you get an output on your Samsung TV, select Change Video Output in the Safe Mode menu.
  • Next, select Change Resolution, then click OK and wait for your console to restart.

Change PS5 Video Output in Safe Mode

  • Select the supported video resolution for your Samsung TV, e.g., 1080p if you have a Full HD model or 2160p for a 4K one. If you’re unsure, leave it to Automatic.

You may now enjoy playing your favourite PlayStation games on the big screen.

Fix PS5 Rest Mode “No Signal” Bug on Samsung TV

Sony has issued numerous software updates for the PlayStation 5 to resolve the problem users experienced with the Rest Mode feature, which sometimes may prevent the console from waking up from standby and displaying a video signal on the TV. However, some still face this issue regardless.

If the “No Signal” error has cropped up for you post-Rest Mode, try the previously mentioned solution to power cycle your PS5. Provided that doesn’t work out, repeat the steps from the section above to boot your console into Safe Mode, then select the Restart PS5 option to see if it powers up normally.

Fix PS5 Rest Mode “No Signal” Bug

Still no luck? Follow these steps:

  • Hold down the Power button to turn off your PlayStation 5.
  • Press and hold the Power button until you hear two beeps, plug your DualSense controller into the console’s front USB port, and press the PS
  • In the Safe Mode menu, select Clear Cache and Rebuild Database, followed by the Rebuild Database Click OK to confirm.

This process may take five to ten minutes (or more) to finish, after which your PS5 should, hopefully, boot into normal operation mode, sending video signals to your Samsung TV.

To avoid the same issue from happening, head to your console’s Settings > System > Power Saving menu and select “Set Time Until PS5 Enters Rest Mode.” There, set both options to “Don’t Put in Rest Mode”, and your PS5 will no longer go into standby regardless of how long there’s no activity on it.

Update Your Samsung TV

If your PS5 works just fine with another TV or monitor but not your Samsung TV, some firmware bug may be preventing it from displaying video from the console, even if other devices work flawlessly via the same input source.

Often, manufacturers like Samsung, LG, and Sony, among others, release software updates for their smart TVs that address such device compatibility issues. Therefore, ensure your TV is up to date using these steps:

  • Press the SETTINGS button on your TV remote. Or head to the HOME menu and navigate to Settings from the sidebar.
  • Scroll down to the Support section, then Software Update on the right-hand side.
  • Choose Update Now; wait while your Samsung TV checks for the latest updates.

Assuming there’s an update pending, click Yes. Your TV will start downloading it, which may take several minutes, depending on your home network conditions. After that, your TV will reboot on its own and take a few more minutes to apply the new software update.

Game On!

That sums up our guide to troubleshooting the PS5 “No Signal” error for Samsung TV or PS5 not Showing on Samsung TV owners. In fact, the above solutions and tricks should work regardless of the TV or monitor you own; it doesn’t necessarily have to be a Samsung one. The step-by-step instructions particular to the PS5 applies to all revisions of the console, including the new PS5 “Slim” models.

If the “No Signal” issue persists despite troubleshooting, your PS5 might require professional repair. Contact PlayStation Support directly or seek assistance from an authorised repair centre. DO NOT TRY opening up the console on your own unless you know what you’re dealing with, and you’ll most certainly end up voiding the warranty.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *